MaverX Masts 2011
STILO 165 HEAVY DUTY - RDM 65% carbon prepreg. With this mast, MaverX has set new standards in terms of performance and reliability at an affordable price yet using prepreg technology and being a fully made in Italy product. This year, after extensive testing on the newest freestyle and wave sails, we’ve come up with the new evolution of the mast, the Stilo 165 Heavy Duty. The curves on all models have been modified according to length to match the specific use of different sail sizes. The boom area has been reinforced with a high resistance material . These modifications have enhanced both the reflex and the manoeuvrability of the mast smoothening out the ride and making the whole rig more stable, especially when overpowered. The new Stilo 165 HD is the perfect choice for hardcore on-shore conditions we usually have here in Europe. Available sizes: 370 to 460pecially when overpowered. The new Stilo 165 HD is the perfect choice for hardcore on-shore conditions we usually have here in Europe. Available sizes: 370 to 460 
STILO 2OO - RDM 85% carbon prepreg. The Stilo 2OO is a Wave-Freestyle mast, made in prepreg technology with an 85% Carbon percentage, which ensures extremely high performance and a reflex (response) that can greatly widen the wind range in which the sail is used. It’s an excellent mast for wave riding but it really shines in side-offshore conditions where our athletes and testers have fine-tuned its characteristics. This result was achieved by optimizing the design process and by using top quality carbon fibres. The mast is extremely easy to control, making reliability, responsiveness and dynamic reflex its key features. Compared to last year’s model, the boom area has been reinforced with a high resistance material as well as the very top of the mast, which is often left exposed when used on sails having a vario top as many 2011 models have. The bottom has been also coated with a protective transparent foil to help protecting the mast against scratch and dents plus saving graphics against wear and UV rays. After continuous use the masts keep looking good. We believe that for such a high performance mast this is an appreciated added value. eve that for such a high performance mast this is an appreciated added value. 
STILO 3OO - RDM 100% carbon prepreg. The Stilo 3OO is our absolute “top performer”, a competition mast, one of the lightest and most performance oriented masts ever produced by MaverX. Built entirely in prepreg technology, with a 100% carbon percentage, it was designed specifically to obtain a curve that not only fits best all the new generation sails, but also enhances their performance on the water. The lightness and dynamic response of the Stilo 3OO are perceived by any given rider, who can actually feel the wind powering up the sail. This translates in an active behaviour which helps getting on the plane, especially in light or gusty wind conditions. These characteristics allow the rider to use smaller sails. Compared to the 2010 model, we have slightly modified the curves to enhance their reactivity on 2011 sails, that tend to use the same mast for different sizes. It’s an excellent freestyle mast, a discipline in which acceleration is vital, as well as in on-shore wave conditions, where you need to get out the impact zone as fast as possible. These are the main reasons that made the Stilo 3OO the weapon of choice by the best athletes, who use it to compete at the highest level. Furthermore, compared to the previous year model the boom area has been reinforced with a high resistance material as well as the very top of the mast, which is often left exposed when used on sails having a vario top as many 2011 models have. The bottom has been also coated with a protective transparent foil to help protecting the mast against scratch and dents plus saving graphics against wear and UV rays. After continuous use the masts keep looking good These are the main reasons why the Stilo 3OO is the perfect mast that MaverX offers to all riders that want to get the best for winning competitions or just enjoying the conditions. Whatever, whenever. 
For Wave Sailors Only 1OOO Limited edition. Hardcore wave - RDM 100% carbon prepreg This brand new, tailor-made mast was created for the toughest wave riders, those that sail in difficult and heavy conditions. We have closely monitored the feedback of the wave riders and have launched this new pure wave mast on the market, to give them the best possible mast to enhance the whole rig performance. The main goal was to create a mast as reactive as a Stilo 300 but having the responsiveness and the smoothness in landings jumps of the Stilo 200. A mast that could withstand huge backloops, where torsion and stress of the carbon fibres are extremely high. A mast that, could allow the rider to sail in very heavy conditions in full control, where you need to be absolutely sure that the mechanical qualities are fail-proof. The only solution, which had already been used by other brands, was to place another layer of fibres at an angle of 45° over the existing vertical and horizontal ones but the results and weights had not been very satisfactory. Our Team worked really hard, for over a year on the design and testing on the water, we have been able to use a new type of carbon fibre that ensures great torsional resistance other than the typical mechanical characteristic of sheer and compression of carbon. MaverX is the first one to benefit this technology. The testing went on for various months in some of the hardest wave spots around the globe, like Tenerife, Fuerteventura, Sylt, Tarifa and Sardinia. The final result of all this work is the new 1OOO Limited Edition, a RDM 100% carbon mast born and developed especially for being used in the waves, with strong and gusty winds, where safety and reactivity are the key factors, when flying ten meter high into the sky or ripping the lip in the critical section of the wave. We have tested these masts on power wave sails, where it really works best ( Combat, Alpha, Atlas, Iron, Ezzy, K.Onda, ,Ego, Force, Session,Lipwave….) The boom area and the top of the mast have been reinforced with a high resistance material about 50cm long. The bottom has been also coated by a protective transparent foil to help protecting the mast against scratch and dents plus saving graphics against wear and UV rays. After continuous use the masts keep looking good We are sure that our products will be a benchmark for wave masts for many years to come. For us this is just what R&D is all about. Being a tailor-made product, this mast will only be available in a limited amount, with a dedicated graphic to all the spots that we have been sailing during the various months of testing. 
Crossover 65% carbon prepreg. Made in Italy The Crossover mast by MaverX was developed for a very wide spectrum of use among all different disciplines from Freestyle to Freeride to Slalom with an optimal price/quality ratio yet guaranteeing the technology, the reliability and the high performance, typical of all MaverX products. Designed to wuality that is the trademark of every MaverX product. Sizes from 370-490 
DAYTONAPRO slalom race mast 100% carbon prepreg. Made in Italy This is the highest performance mast ever built by MaverX, thanks to the use of more technologically advanced carbon fibres ( with extremely high mechanical characteristics) which have been specifically preimpregnated to achieve exactly the characteristics we wanted to excel in this extremely technical discipline. The curves have been studied thoroughly, taking into account the precious feedback given by out test riders on the water. Every detail has been checked because in this discipline the slightest difference in the rig can mean the difference between winning or losing. The all new Daytona Pro 430 and 460 and feather-weight masts feature an extremely high dynamic response. The 490 modes have been revised to better adapt the modern slalom sails with new curves. The Daytona Pro 550 was made for both Race and Formula sails, that need extremely light and performing masts in order to translate every single gust into immediate speed and acceleration, through the rig to the board. The construction concept and results focus on the use of an extremely high tech material l, which is then fully impregnated by our chemical department, in order to achieve the perfect curve and which ensures the maximum power and profile in the lower section of the sail. 
|
|
